Adjusting The Contrast Of The Display - Samson TROVIS 5571 Mounting And Operating Instructions

Operation
Note!
If no key is pressed for two minutes, the PLC returns to the normal display. The background
illumination of the display is switched off automatically.
Any settings that have not been confirmed are not saved and must be re-entered.

1.2.1 Adjusting the contrast of the display

Entering the key code
0000
6
EB 5571 EN
Activate the editing mode.
Display: Entering the key code
0000 blinks
Confirm the 0000 reading.
Set the contrast.
Confirm the changed setting.
Display: Normal display (depending on the
application)