DFI KS070-AL Installation Manual page 9

Assembling the Modular Panel PC
The modular panel PC comprises two parts: a box module and a panel mod-
ule. The assembly of these two parts is easy thanks to DFI's ADP (Adaptive
Display Platform) innovation, which makes the box modules and the pane
modules interchangeable.
1. Take off the cover of the ADP connector of the box module.
ADP
Connector
Cover Screw
2. Hold the box module with its ADP connector in line with the ADP
connector of the panel module. Align the box module with the panel
module using the alignment posts.
Alignment
Post
Note:
If the orientation of the assembly is not correct, the box module will not seat evenly on top
of the panel module, which results in some space in between them and indicates that the
ADP connectors are not engaged. When this is the case, please turn the box module the
other way around.
9