DFI KS070-AL Installation Manual page 16

Ignition Power-on/off Delay Settings
The system comes with in-vehicle power management. The BIOS setup
utility can be used to turn on or off the system with a specific on/off delay
time. Use the following procedure to enable this function.
1. Press "Delete" to enter the BIOS menu when the system powers on.
2. Go to "Advanced" > "IGN Configuration."
IGN Mode Low Voltage Protection: Enables low-voltage protection to
protect your car battery (default: Enabled).
Power on/Power off Delay: Enables it to allow the system to power on
or off after the specified number of seconds (default: Disabled).
16