Nat Settings - Huawei EG860 Series User Manual

EG860
User Guide
Index
2
3
4
5
NOTE

7.4 NAT Settings

Network Address Translation (NAT) settings, or port mapping settings, is necessary if a PC
server is enabled and used by a WLAN, to allow port redirection for access from the WLAN to
the server.
Procedure
Step 1 Choose NAT Settings > Port Mapping. The Port Mapping page is displayed.
Step 2 Click Add Item to configure the parameters in Port Mapping.
The related parameters are as follows:
l Type: indicates the type of the preset port mapping template. It is a configuration wizard.
l Protocol: indicates the Protocol used for port mapping.
l Remote Host: indicates that only the authorized
l Remote Port Range: indicates the port number of remote host. It must be a single number
l Local Host: indicates the
l Local Port: indicates the port number of local host. It must be a single number or a range
Issue 02 (2015-04-10)
Application name
Custom
Custom
Custom
Custom
l 192.168.71.5 is the IP address of
l 192.168.71.1 is the IP address of the attached camera of EG860
l 192.168.71.10 is the IP
l 122.22.22.71 is the IP address allocated by the core network to the
l 191.162.1.3 is the service
l 184.1.5.10 is the
IP address of the Dispatcher
The above IP addresses are for reference only. Please configure them according to the actual networking
plan.
When the value of Type is Custom, other parameters needed to be filled in manually. Set
according to the plan. When setting as other types, the default configuration is applied.
WLAN.
or a range within the range from 1 to 65535.
within the range from 1 to 65535.When this parameter is null, by default, the Local Port and
Remote Port Range are the same. For example, the value of Remote Port Range is 23, the
value of Local Port is also23.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Source Address
Range
122.22.22.71
191.162.1.3
192.168.71.1
184.1.5.10
PC for EG860 local maintenance
address for logging into the EG860 WebUI
IP address of the eOMC910
IP address of the server within the LAN.
Destination
Address Range
191.162.1.3
122.22.22.71
184.1.5.10
192.168.71.1
WAN port on theEG860
IP addresses are allowed to access the
7 Reference
94