Log; Device Switch - Huawei EG860 Series User Manual

EG860
User Guide

7.7.10 Log

User operations and equipment abnormalities are recorded in logs.
Procedure
Step 1 Choose System > Log. The Log page is displayed.
Step 2 Export logs.
1.
2.
3.
Step 3 Set Modem log setting to offline log or Online log.
Step 4 Export serial port logs.
Click Collect, and click Export after collecting serial port logs successfully. If you conduct any
other operation before exporting logs, the Export button becomes unavailable, and you need to
recollect the logs.
1.
2.
3.
----End

7.7.11 Device Switch

Set hardware device switches in Device Switch.
Procedure
Step 1 Choose System > Device Switch. The Device Switch page is displayed.
Step 2 Set Heat status to Enable or not as required.
Issue 02 (2015-04-10)
Set Log level.
The following options are provided to help troubleshoot:
l Information: records information of the system, including login information, upgrade
information, and reset information.
l Warning: indicates problems that may affect operating of the system. If the problem is
not handled in time, it may cause severe problems.
l Error: indicates the errors that may result in faults on equipment.
Optional: Click Clear to clear the logs.
Click Export to export the logs.
NOTE
Set Modem log setting to Online log when connecting Histudio.
Click Collect to collect the serial port logs.
Click Export to export the serial port logs.
NOTE
Personal information is anonymized to protect user privacy.
Click Clear to clear the serial port logs.
NOTE
Only when Heat status is set to Enable, and the temperature is -10℃ or below, will the heating film
activate to heat EG860. Otherwise, the heating film will not be activate to heat.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Reference
103