Huawei EG860 Series User Manual page 115

EG860
User Guide
Alarm Name
the Alarm
Configuration of
High Temperature
the Alarm
Configuration of
RadioSignal Weak
Procedure
Step 1 Choose System > Alarm Configuration. The Alarm Configuration page is displayed.
Step 2 Configure the Alarm Configuration of Lan state, the Alarm Configuration of High
Temperature, and the Alarm Configuration of RadioSignal Weak.
An example is provided as follows:
Alarm Name
the Alarm
Configuration
of Lan state
the Alarm
Configuration
of High
Temperature
the Alarm
Configuration
of RadioSignal
Weak
l AlarmRaiseSmoothPeriod indicates the number of times for alarm generation and
l Configure AlarmReportTh and AlarmResumeTh as required.
l ResumeTh: 0 indicates that no alarm is reported and 1 indicates that alarms are reported.
l AlarmMaskFlag: 0 indicates that alarms are not masked and 1 indicates that alarms are
l In the Alarm Configuration of High Temperature, the value range of AlarmReportTh
Issue 02 (2015-04-10)
Alarm ID
50002
50003
AlarmRaiseS-
moothPeriod
10
6
6
AlarmCeaseSmoothPeriod indicates the number of times for alarm clearing. Configure
these parameters as required. The value range of AlarmRaiseSmoothPeriod and
AlarmCeaseSmoothPeriod are 1~100.
masked.
and AlarmResumeTh are 20 ℃~80 ℃, set AlarmReportTh and AlarmResumeTh with a
difference of more than 10 ℃.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Alarm Type
Environment alarm
Quality of Service
(QoS) alarm
AlarmCeaseS- AlarmReport
moothPeriod Th
10 None
6 75
6 -123
7 Reference
Alarm Severity
Major
Major
AlarmResum
eTh
None
65
-118
106