Huawei EG860 Series User Manual page 60

EG860
User Guide
Figure 4-30 Marking anchor points
Step 4 Use a hammer drill with a Ø14 drill bit to drill a hole on the anchor points, install expansion
bolts, and remove dust from the hole, as shown in
Figure 4-31 Installing an expansion bolt
Step 5 Align the installation holes in the bracket with the expansion bolt holes in the wall, fasten the
nuts of the expansion bolts, and mount the EG860 on the wall, as shown in
Issue 02 (2015-04-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-31.
4 Installation
Figure 4-32.
51