Huawei EG860 Series User Manual page 92

Table of Contents

Advertisement

EG860
User Guide
l
l
Procedure
Step 1 Choose General Settings > Internet Settings. The Internet Settings page is displayed.
Step 2 Configure the parameters in Data Connect.
If Data Connect is Connected, the Internet is accessible.
1.
2.
3.
4.
5.
6.
7.
Step 3 Click APN Profile to add the APN.
l An
Issue 02 (2015-04-10)
When Connection mode is Always on, modify parameters on the page and click
Submit, the number will be redialed.
When Connection mode is Manual, modify parameters on the page and click Submit,
and click Connect after the configuration takes effect.
Configure Data APN.
If Data APN is set to Auto APN, the
Configure the Connection mode.
The related parameters are as follows:
l Always on: indicates that a router is automatically connected to the Internet and always
on. The Connection mode is set to Always on by default.
l Manual: indicates that a router is manually connected to the network after it is powered
on or disconnected due to network faults.
Optional: Set NAT to Enable. NAT Type is NAPT by default.
NOTICE
If NAT is set to Enable, Routing Behind MS cannot be set to Enable.
If DNS is set to Enable, you must add the
Optional: Set Routing Behind MS to Enable. The Enable Routing Behind MS needs
disenabling the natport function or clear the natport and the Internet will be
reconnectted, continue or no? dialog box is displayed. Click OK.
Set Quick Forward to Enable.
Tunnel1 is a tunnel for multicast data. Tunnel2 is a tunnel for unicast data. The
configuration rules are as follows:
l The Peer IP of Tunnel1 cannot be the same with that of Tunnel2.
l The Tunnel IP of Tunnel1 cannot be in the same network segment with that of
Tunnel2. The subnet mask is 255.255.255.0.
NOTE
l The GRE tunnel and quick forward cannot be configured at the same time.
l It is suggested not to configure GRE tunnel and routing behind
l The
WAN
port will be restarted and services will be interrupted for seconds during routing behind
MS
and tunnel configuration.
APN
indicates an Internet access point provided by a carrier. Different carriers have
different
APN
settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
APN
dynamically selects a network mode.
IP
address of the DNS.
MS
at the same time.
7 Reference
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eg860-d61Eg860-c71

Table of Contents