Product Functions; Network Networking - Huawei EG860 Series User Manual

EG860
User Guide

2.1 Product Functions

An EG860, as a data service device on the Internet of Things (IoT), is used in a long term
evolution (LTE) network to upload or download user data. It provides data service (in route
mode), security service (firewall/NAT), and equipment maintenance and management. NAT is
short for Network Address Translation.
Background Information
A wireless data private network is an important part of
private network is based on the wired government private network and requires base stations
and access fibers as supplements. It provides secure and reliable channels for transmitting,
converging, processing, and distributing sensor messages of various
wireless data private network uses unified standards for receiving sensor messages and is capable
of identity authentication and secure transmission to meet the requirements for operating security
and emergency management of a metro IoT.
Functions
IoT
and mobile communications.
A wireless data private network has the following attractions:
l
l
l
An EG860 provides the following functions:
l
l
l
l

2.2 Network Networking

An EG860 is a wireless broadband access terminal that serves as a major device in a wireless
Internet of Things (IoT) data private network. It can be installed indoors or outdoors.
A government private network is a wired MAN that runs over existing optical cables and
SDH
layer, to isolate different types of services that coexist over the same network.
Issue 02 (2015-04-10)
is about to introduce a new wave in the information industry following computers, Internet,
Provides a unified, secure, omnipresent, and standard channel for transmitting sensor
messages applicable to service and emergency management of a city.
Avoids repeated construction of sensor networks.
Reduces the cost of constructing
resources, and ensures information security.
Software management: bandwidth, software upgrading, wireless backhaul, dual tunnels,
virtual SIM card, physical
tunnel, QoS, data service encryption, and status management.
Configuration management: auto-configurable commissioning and configuration
management. The NMS manages an EG860 using the TR069 protocol, including
configuration delivery from the NMS to an EG860, software upgrade, status and
performance monitoring, log collection, alarm management, and health check.
O&M: web-based local maintenance and performance statistics.
Fault management: alarm, connectivity diagnosis, and log management.
or MSTP networks at the physical layer and adopts
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IoT applications, fully utilizes limited frequency
SIM card, multicast, static routing, routing behind MS, L2TP
IoT infrastructures. The wireless data
IoT applications. The
MPLS VPN architecture at the
2 Introduction
IP
6