EG860
User Guide
l
Issue 02 (2015-04-10)
Parameter
Local Host
Local Port
Status
GRE
1.
Choose General Settings > Internet Settings. The Internet Settings page is
displayed.
2.
In the Internet Settings page, configure data for Tunnel.
Tunnel1 is a tunnel for downlink data. Tunnel2 is a tunnel for uplink data. The
configuration rules are as follows:
– The Peer IP of Tunnel1 cannot be the same with that of Tunnel2.
– The Tunnel IP of Tunnel1 cannot be in the same network segment with that of
Tunnel2. The subnet mask is 255.255.255.0.
Table 5-7 Examples for GRE tunnel configuration
Parameter
Tunnel1
Tunnel2
3.
In the Internet Settings page, click Submit.
4.
Choose General Settings > Routing, the Routing page is displayed.
5.
In the Routing page, configure Static Routes based on the plan. For detailed
configuration methods, see
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Example 1
Example 2
192.168.2.2
192.168.2.2
80
–
Enable
Enable
Peer IP
Tunnel IP
Peer IP
Tunnel IP
7.2.8
Routing.
Example 3
192.168.2.2
–
Enable
Parameter
Description
Value
178.1.7.1
IP
router to the core
network
43.0.0.2
IP
tunnel 1 on the
EG860 side
178.1.8.1
IP
router to the core
network
43.0.1.2
IP
tunnel 2 on the
EG860 side
5 Configuration
Description
IP
address of
the camera
The port
number of
local host
Status of port
mapping
address of the
address of
address of the
address of
71