Sim Configuration; Alarm Configuration - Huawei EG860 Series User Manual

EG860
User Guide
Step 4 Click Submit.
----End

7.7.14 SIM Configuration

This section describes how to modify virtual SIM card and PLMN configurations on the SIM
configuration page.
Context
l
l
l
Procedure
Step 1 Choose System > SIM configuration. The SIM configuration page is displayed.
Step 2 Optional: Configure parameters in SIM configuration to change the SIM card number.
The related parameters are as follows:
l MNC_Length can be set to 2 or 3. The default value is 3.
l SIM is a 15-bit number in decimal.
l Authen_Arith can be set to 0 or 1. 0 indicates the Millenge algorithm and 1 indicates the
l Op_Value is a 32-bit number in hexadecimal (128bit). The default value is 0.
l K_Value is a 32-bit number in hexadecimal (128bit).
Step 3 Optional: Configure PLMN configurable parameter to generate the SIM card number. Set
PLMN as required.
Step 4 Click commit.
----End

7.7.15 Alarm Configuration

This section describes how to configure alarm information.
Context
The basic information of EG860 alarms is as follows:
Alarm Name
the Alarm
Configuration of Lan
state
Issue 02 (2015-04-10)
After modifying SIM
Modem to validate the modification.
You can change the SIM card number in SIM configuration. After PLMN configurable
parameter is configured, the SIM card number is generated automatically.
You can set one or multiple parameters at a time.
Test algorithm. Only 0 (Millenge) is supported at present.
Alarm ID
50001
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
configurations and PLMN
Alarm Type
Communication
alarm
configurations, power off and restart
Alarm Severity
Critical
7 Reference
105