Huawei EG860 Series User Manual page 81

EG860
User Guide
l
Issue 02 (2015-04-10)
Table 5-8 Examples for static route configuration
Parameter
Destination IP
Subnet Mask
Gateway IP
L2TP
1. Choose General Settings > L2TP Settings. The L2TP interface is displayed.
2. On the L2TP Config interface, set related parameters.
3. Click Commit.
Table 5-9 Example for L2TP configuration
Parameter
L2TP Tunnel
Peer Ip Addr
User
Password
Add to bridge
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Parameter Value
155.1.1.111
255.255.255.255
43.0.1.2
Parameter Value
Enable
155.1.1.200
admin
TD4GCPE
Enable
5 Configuration
Description
IP address of the video
server
The subnet mask
255.255.255.255
indicates that the
destination of routes is
only one host.
IP address of tunnel 2 on
the EG860 side
Description
If this parameter is set to
Enable, the L2TP
transmission mode is
enabled.
IP address of the router
Authentication user name
of the L2TP tunnel
transmission mode. The
user name must be the
same as that configured
on the router.
Authentication password
of the L2TP tunnel
transmission mode. The
password must be the
same as that configured
on the router.
If this parameter is set to
Enable, a BCP interface
is added to the bridge to
implement ETH over PPP
over L2TPv2.
72