Installation Procedure; Mounting An Eg860 On A Pole - Huawei EG860 Series User Manual

EG860
User Guide
Wire stripper
Adjustable wrench
(capacity ≥ 32 mm)
Measuring tape

4.3 Installation Procedure

This section describes how to install an EG860 on a pole and wall.

4.3.1 Mounting an EG860 on a Pole

This section describes how to mounting an EG860 on a pole in outdoor scenarios.
Context
The following provides the requirements for installation space and components.
l
Issue 02 (2015-04-10)
Wire clipper
Marker (diameter ≤
10 mm)
Diagonal pliers
Requirements for a mental pole of EG860
Figure 4-2 shows the requirements for a mental pole of EG860.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Multimeter
Combination wrench
(21 mm–21 mm) for
installation on a pole
(17 mm–17 mm) for
installation on a wall
Hex key (5 mm)
4 Installation
Hydraulic pliers
Torque screwdriver
1 N m–5 N m
32