Security Access Settings; Security Settings; Firewall General - Huawei EG860 Series User Manual

EG860
User Guide
Step 3 Click Submit.
----End

7.2.13 Security access Settings

This section describes how to enable or disable the two-way authentication with eOMC910 on
the Security access Settings interface.
Procedure
Step 1 Choose General Settings > Security access Settings. The Security access Settings interface
is displayed.
Step 2 If two-way authentication is set to Enable, the two-way authentication with eOMC910 is
enabled.
Step 3 Click Submit.
----End

7.3 Security Settings

The Web NMS offers the Security Settings menu to configure Firewall General, MAC Filtering,
and IP Filtering.

7.3.1 Firewall General

This section describes how to configure firewall level and filter rules. The filter rules work only
if the firewall is enabled.
Context
When default filter rules are used, data is transmitted unidirectionally from a
The firewall filter mechanism is as follows:
l
l
l
Issue 02 (2015-04-10)
NOTE
The FTP port needs to be enabled when using V100R200C00 eOMC910 to manage V200R003C00
EG860 for configuration delivery, log import/export, and upgrading.
NOTE
The two-way authentication needs to be disabled when using V200R003C00 EG860 to connect to
V100R200C00 eOMC910.
MAC Address Filter
Only the filter rule for MAC address needs to be configured.
IP Address Filter
Only the filter rule for IP address needs to be configured.
MAC Address Filter + IP Address Filter
The filter rule for both MAC address and IP address need to be configured. Make sure the
MAC address and IP address correspond to each other.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Reference
LAN to a WAN.
91