Protocol Stack Error Codes - Pro-face GP77R Series Connection Manual

7.9

Protocol Stack Error Codes

Protocol Stack Error Codes are displayed on the GP as follows.
Host communication error (02:FE:**)
** represents one of the following error codes, from 00 to F0.
Error Code
00
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
13
30
32
40
41
42
F0
*1 When using an OMRON Corporation CS1/CJ/CJ1M Series unit, the error code will
appear on the GP screen as shown below. Also, behind the Ethernet error code will
appear the designated Network and Node addresses.
Host Communication Error (02:FE:**:###:###)
*2 When using a Hitachi Industrial Equipment Corporation's HIDIC H Series or a
Schneider Corporation MODBUS TCP unit, the error code will appear on the GP
screen as shown below. Also, behind the Ethernet error code will appear the
designated Node address.
Host Communication Error (02:FE:**:###:###)
GP-PRO/PBIII for Windows Device/PLC Connection Manual
Description
There is a setup error related to the IP address of your station at
initialization.
Initialization has failed.
Cancelling of communications has failed.
An attempt was made to establish a connection before
initialization was successfully completed.
Your station's port number is incorrect
The destination station's port number is incorrect.
The IP address of the other station is incorrectl.
The same port number is already being used by UDP for
establishing the connection.
The same port number is already being used by TCP for
establishing the connection.
Protocol stack has refused connection establishment.
Protocol stack has returned the unsuccessful establishment of
a connection.
The connection has been shut down.
All connections are busy. No connection is available.
Your station was aborted by a different station.
There was no reply from the protocol stack.
There was no reply from the other station.
No network infofmation exists for the designated node.
I/O memory type of the random read-out response data is incorrect.
Network information does not exist.
Undefined error.
Protocol Stack Error Codes
Notes
*1 *2
*1
*1
Node Address (Decimal)
Network Address (Decimal)
Ethernet Error Code (Hex)
Node Address (Decimal)
Ethernet Error Code (Hex)
1