Pro-face GP77R Series Connection Manual page 10

When setting up Parts or Tags from GP-PRO/PBIII for Windows
Before setting up Parts or Tags, Network Information settings must be entered.
Network Information Setting can be set from the [GP SYSTEM SETTING]-
>[MODE SETTING]->[Network Information] screen.
Specifying the PLC's Node Address when setting parts or tags allows the specified
PLC's Device to be read out.
<When CPU Link is NOT used>
Set the [Using CPU Link] check box to OFF.
GP-PRO/PBIII for Windows Device/PLC Connection Manual
This manual, 7.7.3 Environment Setup
Depending on if the CPU Link is used or not address
settings will differ.
However, when connecting to a Web Controller, the CPU
Link feature cannot be used.
1. WM0000
Device Address
Node No.(UDP Connection: 1 to 32, TCP Connection: 1 to 3)
Hitachi Industrial Equipment System - Ethernet
The System Area
and Read Area are
assigned to the PLC
node designated
here.
9