Hitachi Industrial Equipment System - Ethernet
• SET UP OPERATION SURROUNDINGS
<GP-477R/GP-577R/GP-2400/GP-2500/GP-2501/GP-2600/GLC2400/GLC2600 Series>
<GP-377R/GP-2300/GLC2300 Series>
12
Be sure the Destination Node No. entered are the same as the PLC's
settings. However, the Destination Node No. settings cannot be
changed from the GP's OFFLINE mode. Be sure to make these
settings from the GP-PRO/PBIII for Windows [GP SYSTEM SETUP]
-> [MODE SETUP] setting area.
This manual, 7.7.3 Environment Setup
for Windows Settings
GP-PRO/PBIII for Windows Device/PLC Connection Manual
GP-PRO/PBIII