Pro-face GP77R Series Connection Manual page 16

• SEND WAIT TIME (0 to 255)
• TIMEOUT (0 to 65535)
• IP ROUTER ADDRESS
• SUBNET MASK
• UDP RETRY COUNT (0 to 255)
GP-PRO/PBIII for Windows Device/PLC Connection Manual
Wait time can be added when a command is transmitted from the GP. Use the
wait time if the traffic on the communications line is heavy. If no wait time is
required, enter "0."
Enter the desired timeout value. If no response is received from the other station
within the specified time, a timeout occurs. If "0" is specified, the default time is
5 seconds with UDP/IP communication.
Enter the IP address of the router (only one). If no router is used, enter "0" in all
fields.
Enter the subnet mask settings. If no subnet mask is used, enter "0" in all fields.
Designates the number of times the GP re-sends a command when there is no
reply from the other port and a timeout occurs. When no reply is received after
the retry setting number is reached, an error message will appear on the GP
screen.
If GP memory is initialized in OFFLINE mode, random values may
be included. Download the GP System Setting data from GP-PRO/
PBIII for Windows.
Hitachi Industrial Equipment System - Ethernet
15