Hitachi Industrial Equipment System - Ethernet
• NETWORK INFORMATION SETTINGS
New Destination Node Information is entered using the following window.
• Destination Node Information
20
Click the [Network...] button from[GP System Setting]-[Mode Setting] tab,
and the Network Information window will appear.
Set and editDestination Node Information here.
Enter the destination PLC Node number. Click [New] or [Edit] button from
Network Information window or double click the row you want to edit to dis-
play the Destination Node Information window.
The Maximum number of Nodes is 32. When the setting Node number is over
32 units, an error "Setting Node number is over 32 units. Cannot set any more."
appears. When entering the same Node number as the number you have al-
ready registered, the error message "The same Node number has already reg-
istered." appears.
The Destination Node IP Address needs to be set to the same address as the
target PLC or the junction (intermediate) PLC's IP address.
GP-PRO/PBIII for Windows Device/PLC Connection Manual