Pro-face GP77R Series Connection Manual page 15

Hitachi Industrial Equipment System - Ethernet
• When using the built-in Ethernet port on a GP2000 Series unit,
• Check the 2-Way driver's "SRC PORT No." Setting via the fol
• The default value is 8000. The 2-Way driver uses this port and
• When "SRC IP ADDRESS" is [0.0.0.0], the IP ADDRESS set in 2-
SET UP NETWORK EXT. INFORMATION
<GP-477R/GP-577R/GP-2400/GP-2500/GP-2501/GP-2600/GLC2400/GLC2600 Series>
<GP-377R/GP-2300/GLC2300 Series>
14
be sure not to enter duplicate "SRC PORT No." values.
lowing menu:
GP OFFLINE mode's Main menu [INITIALIZE] -> [SETUP OP-
ERATION SURROUNDINGS] -> [EXTENDED SETTINGS] ->
[SETUP ETHERNET INFORMATION] screen.
the following nine ports for a total of 10 (8000 ~ 8009).
Way Driver is enabled.
GP-PRO/PBIII for Windows Device/PLC Connection Manual