Mode Settings - Pro-face GP77R Series Connection Manual

• Subnet Mask
• UDP Retry Count (0 to 255)

MODE SETTINGS

• System Start Address
GP-PRO/PBIII for Windows Device/PLC Connection Manual
Enter the subnet mask settings. If no subnet mask is used, enter "0" in all fields.
Designates the number of times the GP re-sends a command when there is no
reply from the other port and a timeout occurs. When no reply is received after
the retry setting number is reached, an error message will appear on the GP
screen.
The System Start Address is assigned to the PLC node designated here.
For setting, refer to 8.7.2 Supported Devices
Hitachi Industrial Equipment System - Ethernet
19