Multiple Connections - Agrowtek GrowControl GC-Pro Operation Manual

3. Select "Save As New File" again and save another file for your second controller (and so on.)
4. Load the file that was just saved for the second controller: "File -> Program Settings File -> Load File." Select the file and
press .
5. Change the data logging and camera logging directories if desired.
6. Adjust the Ethernet settings as required for the second unit and connect to it.
7. Ensure that the controller has a unique "Controller Name." If there is no name set or multiple controllers share the same
name, the data logging files may be written to the same file and the camera images may over-write each other. Files are
named automatically with the controller name and date stamp.
Connect to Multiple Controllers
Once a configuration file has been created for each controller, the program will ask which it is to load when it opens.
1. Open a copy of the program for each controller you wish to connect to.
2. Select the program settings file for each controller.
3. The connection settings will be automatically loaded; connect to the controller(s.)
www.agrowtek.com
© 2013 Agrowtek Inc.
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | agrowtek@agrowtek.com
62