24-Hour Cancel Timers - Agrowtek GrowControl GC-Pro Operation Manual

24-Hour Cancel Timers

24-hour cancel timers operate like a 24-hour timer, except instead of turning an output on, they will allow it to operate only
during a specified time band, and disable it outside of the allowed time band.
Start & End Time
0:00 – 23:59
Time of Day
0:00 – 23:59
Example uses include:
 Disabling equipment prior to 'lights out' or 'lights on' times.
 Operating CO2 output(s) only during a preferred period.
Start Time: The time of day that the output becomes disabled.
End Time: The time of day that the output is allowed to be activated again.
Output: The output which will be canceled when cancel timer is active.
VSC #: VSC control to limit to maximum % open value when cancel timer is active.
Touch Panel
The 24-hour cancel timer menu is accessed from the timers menu.
Press "24 Hr Timers" button
to access the 24 hour timers.
Software
The 24-hour cancel timer settings are accessed via the controls tab under the "24-Hour Cancel Timers" group.
25
www.agrowtek.com
VSC Channel
Output # & Position
If time is between start and
Timer Control
Select a timer to view settings.
© 2013 Agrowtek Inc.
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | agrowtek@agrowtek.com
Use standard on/off output, VSC output,
or both simultaneously when timer
control is activated.
end time
Enter the start and end times
and output number to disable (if
desired.) Press 'output' button to
toggle to VSC settings.
Turn OFF output
If output # is not 0
Set VSC Position on Channel #
Close VSC
If channel # is not 0
Enter a VSC control address
and maximum % open target
(if desired.)