Re-Start Delay Timers - Agrowtek GrowControl GC-Pro Operation Manual

Re-Start Delay Timers

Re-start delay timers sense when an output has just turned off, then disables the output for the re-start delay time. This timer
is designed to prevent short-cycling of equipment.
Re-Start Delay Time
Seconds
Output Status
On or Off
Delay Time: The amount of time that the output will be disabled for once it has
turned off.
Output: The output which is being managed by this timer.
Example uses include:
 Prevent a compressor motor from short-cycling.
 Prevent a heating system from short-cycling.
Touch Panel
The band timer menu is accessed from the timers menu.
Press "Re-Start Timers" button to access
the re-start delay timers menu.
Software
The re-start delay settings are accessed via the controls tab under the "Re-Start Timers" group.
29
www.agrowtek.com
Output #
Timer Control
If Output turns Off
Select a timer to view its settings.
© 2013 Agrowtek Inc.
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | agrowtek@agrowtek.com
Keep Output OFF
for Re-Start Delay Time
On
Output
Off
Re-Start Delay
Press the buttons to change the values
with a numeric key pad.