Table of Contents
Advertisement
Cameras
The cameras tab allows monitoring up to 8 video cameras per control system. The software can capture images from the
cameras hourly through out the day, or at a specific time each day. Coupled with the data logs, this allows a visual log as well.
Photos are saved with their controller name, camera number, time and date in the selected "Capture Folder."
Cameras are supplied with a set of setup instructions. When the cameras are properly configured, you can setup the cameras
in the PC software.
1.
Enter the local (or remote) address of the camera. This may be an IP address or web address starting with http.
2.
Enter the user login and password information.
3.
Check the "Enable Camera" box. The software will attempt a connection. If successful, it will begin monitoring the
camera, updating as quickly as the hardware and internet connection(s) will allow.
Note: Currently compatible only with cameras available from Agrowtek Inc.
57
www.agrowtek.com
© 2013 Agrowtek Inc.
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | agrowtek@agrowtek.com
Advertisement
Table of Contents
Need help?
Do you have a question about the GrowControl GC-Pro and is the answer not in the manual?
Questions and answers