Light Irradiance Calibration; Software Features; Sensor Display Groups - Agrowtek GrowControl GC-Pro Operation Manual

Light Sensor Calibration
The light sensor has a simple zero calibration which is designed to calibrate the sensor for darkness.
Before calibrating the light sensor zero, ensure the light sensor is in total darkness. Allow at least 60 seconds for the light
reading to fully settle and stabilize.
Touch Panel
Access the sensor calibration menu from "Main Menu -> System -> Analog Sensors -> Sensor Cal."
Press "Light" to calibrate the light
sensor.
Software
Press the calibration button

Software Features

The GC-Pro comes with free computer software which allows full remote monitoring and control of the GC-Pro, as well as some
additional features, including:
 Data-logging to CSV files
 Graphical trending up to 48 hours
 Email alerts from alarms
 Video camera monitoring and image logging
 Upload/Download settings files to/from controllers
www.agrowtek.com
Zero: Press "Set Zero" to calibrate the
light sensor zero in darkness.
for the light sensor to calibrate.
© 2013 Agrowtek Inc.
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | agrowtek@agrowtek.com
54