Cycle Timers - Agrowtek GrowControl GC-Pro Operation Manual

Cycle Timers

Cycle timers operate in a continuously repeating on-off-on... loop. Cycle timers can be operated during the day & night, day
only, or night only.
On & Off Time Time Units
Mins / Secs Mins/Secs
Day/Night
per zone#
On/Off Time: Specify the on and off durations for the cycles.
Timer Units: Select units of minutes or seconds.
When to Operate Timer: Choose when this timer should
operate; day only, night only or both.
Zone: Zone to detect day and night from.
Output: Output to operate with the cycle timer.
Example uses include:
 Timing water pumps for hydroponics systems.
 Intermittent operation of circulation fans or ventilation fans
 Other timed, cycled equipment.
Touch Panel
The cycle timer menu is accessed from the timers menu.
Press "Cycle Timers" button to access
the cycle timers menu.
Software
The cycle timer settings are accessed via the controls tab under the "Cycle Timers" group.
www.agrowtek.com
Mode
Day/Night/Both
If Day/Night status = Mode
Timer Control
(and On/Off times are not 0)
Select a timer to view its settings.
© 2013 Agrowtek Inc.
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | agrowtek@agrowtek.com
Zone #
0 defaults to 1 Output #
On
Output
Off
Day/Night
Start
Turn ON Output
for ON time duration
Turn OFF Output
for Off time duration
'On' Time 'Off' Time
Press the buttons to change the values
with a numeric key pad.
26