Agrowtouch Tm Touch Screen - Agrowtek GrowControl GC-Pro Operation Manual

AgrowTouch
Home Screen
The home screen displays the
sensor readings, time and date,
controller run status, and several
menu buttons.
If the controller is in multi-zone
mode, the bottom right corner will
display a button to toggle between
zone displays.
Screen Saver
The touch screen has a built-in screen
saver which turns off the back light after 30
minutes. To re-activate the screen, simply
touch any where on the screen.
Indoor climate sensor display.
Key Pads
When entering a number, a numeric key-pad will
be displayed.
Numeric Keypad
Decimal Values
There is no decimal point key on the touch screen. For fields that have
a decimal place, enter the number as follows:
72.5 would be entered as: 7 2 5 Enter
75.0 would be entered as: 7 5 0 Enter
www.agrowtek.com
TM
Touch Screen
Main Menu
Inputs & Outputs
Status / controls
Hydroponics sensor display.
Acceptable
range
Current
Setting
© 2013 Agrowtek Inc.
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | agrowtek@agrowtek.com
Change display between
Controller Run
climate, hydro, weather and
Mode status and
other sensor displays.
start/stop menu
Outdoor weather sensor display.
When entering a name, an alpha-numeric
key-pad will be displayed.
Alpha-numeric Keypad
Press the 'CAP' key to change
between upper and lower case, and
to display special characters.
Time & Date
Press here to activate
screen saver
Reading Heading
Press here to view
graphing history
Sensor reading value
Graphical meter display
Change display to
next zone
Cancel
Enter
Space
Clear
Delete /
Backspace
4