Agrowtek GrowControl GC-Pro Operation Manual page 35

Drain/Fill Time: Minutes to drain and fill the reservoir respectively.
Cancel Output #: Output to cancel when batch dosing is active. Use this to prevent feed pumps from operating when dosing.
Set to disable the cancel output when dosing is active in batch mode only, or either batch mode or auto mode.
Touch Panel
The nutrient dosing settings are accessed from the controls menu.
Press "Nutrient Dosing" button to access
the nutrient dosing menu.
Setup drain & fill (optional) and
manually start a batch.
Software
www.agrowtek.com
Press "Auto Dosing" button to access the
automatic nutrient dosing menu.
Enable/Disable automatic reservoir
changes, set drain & fill times and
output numbers.
© 2013 Agrowtek Inc.
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | agrowtek@agrowtek.com
Enter a batch/reservoir size (gallons.)
Enable/Disable batch dosing. Press
"1" to toggle zone 1 to zone 2.
Initiate a batch cycle and monitor
which pump is active and the total
amount it will dose.
34