Nutrient Scheduler; Settings - Agrowtek GrowControl GC-Pro Operation Manual

16-Step Nutrient Scheduler
GrowControl The scheduler can update the concentration set points and nutrient part ratios at the time and date which is set
for each of the available 16 steps. Batch dosing can be automatically initiated on the change to drain and fill the reservoir,
then dose with the required nutrient amounts.
To setup the scheduler:
1. Starting at step #1, enter a date and time when the change will occur.
2. Set the desired concentration levels (if using auto dosing.)
3. Set the nutrient part ratios (mL/Gal) for each part to be dosed.
4. Repeat steps 1 through 3 for each of the steps/dates in the growth process.
5. Enable the dosing scheduler.
Touch Panel
The scheduler is accessed via the nutrient dosing menu.
Access the nutrient scheduler

settings.

Software
www.agrowtek.com
Adjust the concentration set points and
effective date/time. Press the "Part"
buttons to access mL/Gal ratios.
© 2013 Agrowtek Inc.
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | agrowtek@agrowtek.com
Set mL/Gal values. Use "Next/Prev"
buttons to move through the
scheduler steps.
38