3D Types - Digital Projection E-Vision Laser 13000 WU Series Installation & Quick Start Manual

Digital Projection Ltd. E-Vision Laser 13000 WU Series

3D types

To display a 3D image if is first necessary to select the 3D format. This can either be Frame Sequential or Dual Pipe. These formats are described below:
Dual Pipe (LEFT and RIGHT) The left and right eye images are delivered on two separate
l
HDMI links, which the projector will interleave for 3D display.
Frame Sequential For sequential 3D, an external sync is required to identify left and right
l
frames. If no sync is available from the sequential source, the projector will generate an
output sync, but it may then be necessary to manually set the Eye Swap each time the player
is started.
Dark Time and Sync Offset need to be set only once, to optimize the image for the glasses in use.
Rev A June 2019
page 72
Using the projector
HDMI 1
HDMI 2
L R
L
R
Dual Pipe
L R
Sequential
Notes
Operating Guide