Factory Reset - Digital Projection E-Vision Laser 13000 WU Series Installation & Quick Start Manual

Digital Projection Ltd. E-Vision Laser 13000 WU Series

Factory reset

To restore the factory default settings:
1. Navigate to Factory Reset and press ENTER/OK.
2. When prompted, press ENTER/OK to confirm your choice, or press EXIT to cancel.
Rev A June 2019
page 86
Using the projector
Model Name
Serial Number
Software Version 1 MD03-SE10-FE09
Factory Reset
Warning
All user settings will be lost
Press OK to confirm
Press Exit to cancel
Thermal Status
Factory Reset
Information
E-VisionLaser 13000 WU
X000XXXXX0000
►
Notes
Factory reset does not
reset the Network settings,
or High Altitude mode
Operating Guide