3D Types - Digital Projection E-Vision Laser 7500 Series User Manual

Digital Projection E-Vision Laser 7500 & 8500 Series
3D menu continued from previous page

3D types

In most situations you can use the Auto
format. Otherwise, consider the notes below to help you set up the 3D input manually.
The following 3D formats are supported:
•
Dual Pipe (LEFT and RIGHT)
The left and right eye images are delivered on two separate HDMI links, which the projector
will interleave for 3D display.
•
Frame Packing
This format will be detected, re-synchronised, frame-multiplied and displayed at 96 Hz with
the left eye / right eye dominance automatically extracted from the video data. You need to
optimize and
Dark Time Sync Delay
•
Top and Bottom
Sets the projector to reformat the video frames and map them to the display with the left
eye / right eye dominance automatically extracted from the video data. You need to optimize
Dark Time and Sync Delay manually to suit your chosen switching glasses.
•
Side by Side (Half): interlaced and progressive, 50 and 60Hz
The side-by-side image will be de-interlaced (if appropriate), resized and then sequentially
displayed at 100 or 120 Hz. The left eye / right eye dominance will be automatically extracted
from the video data, however you will need to optimize
to suit your chosen switching glasses.
Dark Time and Sync Delay need to be set only once, to optimize the image for the glasses in
use.
Operating Guide
setting to have the projector automatically detect the
manually to suit your chosen switching glasses.
and
Dark Time Sync Delay
USING THE PROJECTOR
L
HDMI 1
R
HDMI 2
Dual Pipe
L
R
L
R
manually
L
Side-by-Side (Half)
Frame Packing
Top-and-Bottom
R
Notes
Rev B September 2016
page 59