Table of Contents
Advertisement
2. PRINTER SETUP
2.6 Opening/Closing the
Top Cover
WARNING!
To avoid injury, be careful
not to trap your fingers while
opening or closing the cover.
AVERTISSEMENT!
Pour prévenir tout dommage,
évitez d'accrocher ou de
coincer tous objets dans le
mécanisme .
CAUTION!
1. Be careful not to touch the
Print Head Element when
opening the Top Cover.
Failure to do this may
cause missing dots by
static electricity or other
print quality problems.
2. Do not cover the Cover
Open Sensor with your
finger, hand, etc. Doing so
may cause the sensor to
wrongly detect a cover
close state.
ATTENTION!
1. Prenez garde à ne pas
toucher les éléments actifs
de la tête en levant le bloc
de tête. L'électricité
statique peut engendrer
des problèmes de qualité
d'impression ou
endommager des points de
tête.
2. N'obturez pas le détecteur
de capot ouvert avec votre
main ou votre doigt, car
cela pourrait entrainer une
détection erronée de la
fermeture du capot.
NOTE:
Be sure to close the Top Cover
completely. Failure to do this
may affect the print quality.
When opening or closing the Top Cover, please be sure to follow the
instructions below.
To open the Top Cover:
1. Press down the Top Cover Release Button to unlock the Top Cover,
and then fully open the Top Cover.
As the Top Cover is held by the damper, it does not close under its own
weight.
To close the Top Cover:
1. Press down the portions of the Top Cover indicated by the arrows
until they click into position.
E2- 6
ENGLISH VERSION EO1-33095
2.6 Opening/Closing the Top Cover
Advertisement
Table of Contents
