Firewall; Notification Setup; Schedule - Idis DirectIP DR-1304P Operation Manual

Part 2 - Configuration

Firewall

Setting up a customized firewall rule set, it allows or
denies access such as specific MAC address, IP address
and receiving network port of the NVR.
Select Use Firewall to activate firewall function. Click
the + icon at the bottom of the list to set up a firewall
rule.
● Title: Edit the name of the rule.
● Type: Set the IP adddress, the MAC address or the
network port.
● Action: Select which actions to apply this firewall rule
to.
– Drop: Discard the packet that matches all the
specified conditions.
– Reject: Deny the packet that matches all the
specified conditions and send back an ACK packet
telling it that the "packet was dropped" to the
sender.
– Accept: Allow the packet that matches all the
specified conditions.
● Interface: Specify the ethernet interface. It refers to a
WAN (Network Client) or VIN (Video-In).
● Mac Address: If the rule is set to MAC address, enter
the sending MAC address
● IP: If the type of the rule is set to IPv4 or within the
IPv4 scope, enter the sending IP address.
● Port: If the type of the rule is set to port or within the
port scope, enter the receiving network port number
of NVR.
66

Notification Setup

Schedule

Select the + icon at the lower left corner of the screen to
add a notification schedule.
● Day: Add different schedules for different days of the
week.
● Range: Change the event notification time frame.
● Notify: Select which notifications to generate when
an event occurs. Select Mail, LAN 1 through 5, Push,
and/or Summary.
• In order to use the Notification (Callback) feature,
the NVR must be registered on the remote program.
• Select the icon to delete the existing schedule.
● Summary Email Interval: Transmit event summary
emails to a remote destination at specified intervals.