Part 1 - Getting Started
Login
Configuring the NVR's settings and accessing its
searching and other functions require an authorized
user login.
1
Bring up the Live menu and click on
the mouse.
2
Select a user, enter the password, and then select
OK.
• Click on the
field using the mouse. This will bring up a virtual
keyboard you can use to assign a password. For
more information on using the virtual keyboard,
refer to the Text Input via Virtual Keyboard on
page 31.
3
To log out, bring up the Live menu and click on
(Log out) using the mouse.
22
(Login) using
button next to the password
Find Password
If you do not know the password, select FIND PW . You
can set a new password.
1
Enter a user, registered email and then select Get
Verification Code.
2
Enter Verification Code and select OK.
• Select the question mark button at the bottom
left corner of the screen to refer to the password
settings instructions.
• The password must be entered only with the
virtual keyboard.
• FEN service must be enabled to use Find
Password function.