Event Log Search - Idis DirectIP DR-1304P Operation Manual

Event Log Search

Select Search Mode > Event Log Search to bring up
the Event Log Search window.
Select an eent to display the recording made on the
selected time and date (paused state). Select the Play
button in the middle of the screen to start playing back
the recording. Use the drop-down menu above to load
recordings from other cameras.
● Selecting the specific event displays the screen to be
stationary. By clicking the
right, you can copy the event.
● You can uncheck the First and Last options at the
top of the Event Log Search window and specify the
search time frame manually.
Select First for From and Last for To to select the entire
recording from start to end.
● If designating From or To settings manually, you will
be able to enable/disable the Check Time Overlap
option.
● Exceed the People Limit: Select which channels to
search Exceed the People Limit events in.
● Exceed the Time Limit: Select which channels to
search Exceed the Time Limit events in.
If the system's clock has been changed and the
designated From or To point exists at more than one
location, you will have to choose one. Only the events
that took place between the selected From and To
points will be searched. If Check Time Overlap has
not been selected, events from the entire From and To
range will be searched.
button on the camera
● Use event filters to include/exclude specific system
events such as Panic Record, Check Recording,
Disk Almost Full, Disk Bad, Disk Temperature, Disk
S.M.A.R.T., and Disk Config Change from the search.
Device Filter
● Motion: Select which channels to search motion
detection events in.
● Video Loss: Select which channels to search video
loss events in.
● Trip Zone: Select which channels to search trip zone
events in.
● Tampering: Select which channels to search
tampering events in.
● Record Channel: Select which record channels to
search events in.
● Recording Fail: Select which channels to search
recording fail events in.
● PIR: Select which channels to search PIR events in.
● Auto Tracking: Select which channels to search Auto
Tracking events in.
Selected record channels are searched for events with
at least one linked recording. If no camera is selected,
only the events with no linked recording camera are
searched.
Part 3 - Search
79