Context Menu; Motion Search - Idis DirectIP DR-1304P Operation Manual

Context Menu

Right-click on the Camera screen to access the context
menu.
● Zoom: Zoom in.
● Edit Group: Rearrange the split screen layout.

Motion Search

Select Motion Search from the Search menu to bring
up the Motion Search Setup window.
Motion Search cannot be performed while using a split
screen layout. Select Single Screen mode.
Select Option... to configure Motion Search options.
● Select First under From and Last under To to search
the recording from start to finish. Alternatively, you
can uncheck the First and Last options and specify
the search time frame manually.
● Type: Motion Search looks for motion in the selected
area by comparing individual frames against their
preceding frames. This means slow and gradual
movements, no matter how long they persist, will not
be recognized. In contrast, Museum Search looks
for changes in the specified area by using the From
frame as a reference. Museum Search, therefore,
recognizes even minute deviations from the original
From frame.
● The Zone setting can be configured in the identical
manner as the Zone setting under System Setup -
Motion Detection. For more information, refer to the
Video-Analytics_Motion on page 57.
Museum Search may not function properly if the
edge of the object is included in the Zone. For more
accurate search results, set the inside of the object's
edge as the detection zone.
● Sensitivity: Set to between 1 (Low) and 5 (High).
● Min. Blocks: The Min. Blocks option is available with
Motion Search only.
Once all the options have been configured, select
Search. Select search results entry to display the video
recording on the left. To play the recording, exit the
setup window by selecting Close.
Part 3 - Search
77