Mail - Idis DirectIP DR-1304P Operation Manual

Part 2 - Configuration

Mail

Configure Mail settings.
● +Group: Add a recipient group and select the image
file format attached to an email.
A virtual keyboard appears allowing you to enter the
Group name. When selecting MP4, the NVR will attach
the event detected image file (MP4 format) to an email.
● +Mail: Add a mail recipient
Select the group name and then assign the Group to
Recipient. Enter the the recipient's e-mail address and
mail server provider. Select the
server provider from a list ot registered SMTP mail server
providers.
The recipient's mail address must be in the correct
email format and contain the @ symbol.
Select the Attach Type to attach event recordings
to outgoing mails to an account that belongs to that
group.
Select the icon to remove the account and added
group.
68
icon to select the mail
SMTP Setup
Select SMTP Setup at the bottom right corner of the
screen to configure an SMTP server.
1
Select the SMTP server Type.
2
Enter the SMTP Server's IP address or domain name
and then configure the Port and Sender settings.
Default SMTP server port number is 25. Select Test to
send out a test mail using the current settings.
Select SS/TLS or STARTTLS, depending a method of
supporting a secure connection.
• If you have configured the DNS Server setting under
Network - WAN, you can enter the STMP server's
domain name instead of its IP address in the SMTP
Server field.
• Address entered under Sender must be in the
correct email format and include the @ symbol.
If user authentication is required by the SMTP server,
select Use and then enter the User and Password
information.
3
Select OK to apply and exit.
This product contains content developed by OpenSSL
Project for use in Open SSL Toolkit (http://www.
openssl.org/).