General; Advanced Setup - Idis DirectIP DR-1304P Operation Manual

Part 2 - Configuration

General

Enable/disable the covert view and rename cameras.
● Title: Edit the camera's name.
● Use: Set the camera as Normal, Covert 1, or Covert 2.
Live images and video recordings from cameras that
have been set as Covert 1 or Covert 2 will not be
available to users who do not have covert camera
access. Setting a camera as Covert 1 hides its images
but does display OSD information about the camera.
Setting a camera as Covert 2 hides its images as well
as ODS information about the camera as if it has been
deactivated completely.
42

Advanced Setup

Configure security and other advanced camera settings.
● Video: Adjust the camera image sensor settings such
as white balance and exposure. Configuration options
may differ depending on the camera model.
● Privacy Masking: Enable/disable and configure
privacy masking for the camera.
● SSL: Set the camera's security level as Unavailable,
Standard, High, or Very High. Standard, High and
Very High settings apply SSL (Secure Sockets Layer)
protection to the camera.
● Reset: Resets the port or cameras.
– Factory Reset : Control the PoE Switch's port. This
option is available when connecting to Video In/
PoE port or using a DirectIP™ PoE Switch (optional).
Select PoE Reset to reboot the camera. It is not
supported by video encoders.
– Soft Reset : Reboots the camera.
– Factory Reset : Resets the NVR to all its initial
factory settings. It is supported by DirectIP™
cameras only.
● Mode: Select a resolution mode. This is supported by
video encoders only.
1 2
5
6
7
8
9
0
!
@
Numbers shown below Preset, Scan, Pattern, and
Tour indicate the numbers of configured functions.
3 4