Video-Analytics_Auto Tracking - Idis DirectIP DR-1304P Operation Manual

Part 2 - Configuration
● Ignoring Interval: The system does not produce
event log entries or issue remote notifications
regarding event for the spcified time after the initial
motion was detected. Set the value between 1 sec
and 5 secs or choose Never.
Ignoring interval setting does not affect the motion
detection recording.
● Use Ignoring Time: Select Time Setup to specify
the PIR detection ignore time. PIR detection will be
disabled during the specified time frame.
62

Video-Analytics_Auto Tracking

When the PTZ camera detects a moving object, the
camera operates the PTZ to track the mobing object.
Auto tracking event occur simultaneously when the PTZ
camera tracks an object.
● No.: Select which cameras to apply Auto Tracking to.
● Using Zoom: When tracking an object, the PTZ zooms
in the object.
● Obejct Size: Set the zoom level when using auto
tracking. The larger the object size is set, the larger the
object will be displayed on the screen.
This setting is enabled only when the Zoom
function is on.
● Wait Time After Trace: After the object tracking is
completed, the camera monitors the end poistion for
a set period of time and then moves the PTZ to the
initial position.
• If you do not set this function, the PTZ will not
move to the initial position after auto tracking
ends.
• Only some PTZ cameras support this event.
Please contact the manufacturer for availability
of this event.
• When setting the PTZ with an linked action in the
Action tab, the camera where the event occurs
cannot be set to PTZ linked action camera. For
instance, when setting PTZ on the Auto Tracking-
Actions(no.8) tab, you cannot set PTZ of no.8
camera.
● Actions: Specify which actions to take when Alarm-In
is detected.
– Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.