Device
This screen displays an overview of device events.
When an event occurs, the corresponding channel
flashes for 5 seconds.
Event Types
**Recording Fail of
Main Stream
** The two events are supported by some products
only.
**Recording Fail of
Sub Stream
System
This screen displays an overview of system events.
When an event occurs, the corresponding channel
flashes for 5 seconds.
● Panic Record: Displays event status based on current
Panic Record status.
● Check Recording: Displays event status based on
System Monitoring settings. For more information,
refer to the Self-Diagnosis on page 38.
● Disk Almost Full/Disk Full: If the storage device is
not in Recycle status, event status is displayed when
the amount of disk space specified under System
Monitoring is reached and when the disk becomes
100% full. For more information, refer to the Self-
Diagnosis on page 38.
● Disk Config Change: It will be highlighted when
the NVR reboots after the hard disk drive has been
replaced.
● No Storage Found: It will be highlighted when no
recordable storage device has been found.
Part 2 - Configuration
71