Safety Information; Environmental Information - Keysight Technologies PNA Series Installation And Getting Started Manual

In This Guide
Safety, Regulatory, and Environmental Information

Safety Information

Complies with the essential requirements of the European Low Voltage
Directive as well as current editions of the following standards (dates and
editions are cited in the Declaration of Conformity):
— IEC/EN 61010-1
— Canada: CAN/CSA-C22.2 No. 61010-1
— USA: UL std no. 61010-1

Environmental Information

Samples of this product have been type-tested in accordance with the
Keysight Environmental Test Manual and verified to be robust against the
environmental stresses of storage, transportation and end-use; those
stresses include but are not limited to temperature, humidity, shock,
vibration, altitude, and power-line conditions. Test methods are aligned
with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3.
Parameter
Operating Environment
Operating Temperature
Storage Temperature
Error-corrected range
Installation Note E8356-90001
Required Values/Ranges
For Indoor Use ONLY
This instrument has no air filters on the fan ports. Operation in dirty,
dusty, or similar environments must be avoided.
0 °C to +40 °C
The instrument powers-up and displays no error messages within this
temperature range (except for "source unleveled" error message that may
occur at temperatures outside the specified performance temperature
range of 25 ± 5 °C).
–40 °C to +70 °C
23 °C ±3 °C with less than 1 °C deviation from calibration temperature.
37