Step 7. Perform Administrative Tasks - Keysight Technologies PNA Series Installation And Getting Started Manual

In This Guide
Installing Your Analyzer
Figure 6
This product contains a Windows operating system. The Network Analyzer
application is supported and qualified only with the version of Windows
that was installed when shipped.
Windows 10 Operating Systems
Beginning in on or around November 2018 all B model analyzers are shipped
with Windows 10. If your analyzer has Windows 10, please refer to "Windows
10 Operating System (B Models Only)" on page 22.
Windows 7 and Windows 10 Operating Systems
Windows 7 and Windows 10 comes with a display technology called
ClearType. This makes displayed text much easier to read on the PNA. The only
drawback comes with viewing the display from the bottom. The colors of some
small display elements will appear to shift when the viewer's eyes are more
than 30 degrees below perpendicular. If necessary, ClearType can be disabled.
On the PNA desktop, click Start, then Control Panel then Appearance and
Personalization, then Display, then Adjust ClearType Text.

Step 7. Perform Administrative Tasks

We recommend that you consider performing the following administrative
tasks shortly after powering up the analyzer for the first time.
— Set up the administrator password only if required for your location. The
— Set the time, date, and time zone (if needed).
Do NOT create additional User Accounts until you have read the PNA Help
file topic: "PNA User Accounts and Passwords" which states why and how
this should be done.
18
PNA already has a default password.
Installation Note E8356-90001