Microsoft Windows; Installed Software; Customer Information Of Software - Keysight Technologies PNA Series Installation And Getting Started Manual

In This Guide
Windows 10 Operating System (B Models Only)

Microsoft Windows

Your instrument has Microsoft Windows installed at the factory. Keysight has
already configured many of the settings in Microsoft Windows for optimal
behavior in your instrument. This chapter contains details about many of these
settings.

Installed Software

Vector network analyzer software
The PNA Vector Network Analyzer Measurement Application software is
installed in the vector network analyzer. Additional measurement applications
are available. Each application requires a license to execute the software. All of
these applications are installed by the factory at the time of manufacture, even
if the licenses have not been purchased. You may purchase additional licenses
at a later date.

Customer Information of Software

3rd party software verified by Keysight
Keysight has verified that the following programs are compatible with the
instrument's applications:
— MathWorks MATLAB
Installation of other 3rd Party Software
The PNA Vector Network Analyzer platform is an Open Windows environment,
so you can install software on the instrument. However, installation of
non-approved software may affect instrument performance. Keysight does not
warrant the performance of the analyzers with non-approved software
installed.
Before installing any additional programs on the instrument, you should
exit the Vector Network Analyzer application.
Also, you must not remove any applications or programs that were
installed on the instrument when it was shipped from the factory.
If you install programs other than those that Keysight has tested, it could cause
problems with the instrument's applications. If this happens, you should try
uninstalling the program that has caused the problem, or try changing the
program's configuration. If this does not correct the problem, you may have to
use the Instrument Recovery system to reinstall the instrument's system
software.
Installation Note E8356-90001 23