Maintenance Inspection Report - Genie GS-2669 RT Service Manual

November 2014
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
• Make copies of this report to use for
each inspection.
• Select the appropriate checklist(s) for
the type of inspection to be
performed.
Daily or 8 hours
Inspection:
Quarterly or 250 hours
Inspection:
Semiannually or 500 hours
Inspection:
Annually or 1000 hours
Inspection:
Two year or 2000 hours
Inspection: A+B+C+D+E
• Place a check in the appropriate box
after each inspection procedure is
completed.
• Use the step-by-step procedures in
this section to learn how to perform
these inspections.
• If any inspection receives an "N", tag
and remove the machine from
service, repair and reinspect it. After
repair, place a check in the "R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
Part No. 229753

Maintenance Inspection Report

Checklist A
A-1 Manuals and decals
A-2 Pre-operation inspect
A-3 Function tests
A-4 Engine maintenance
A-5 Test the oscillate
Perform every 40 hours:
A-6 Engine air filter
Perform after 40 hours:
A-7 30 day service
Perform after 50 hours:
A-8 Engine maintenance -
Kubota models
Perform every 50 hours:
A-9 Engine maintenance -
Kubota models
Perform every 100 hours:
A-10 Engine maintenance -
Kubota models
Perform every 150 hours:
A-11 Drive hub oil
Perform every 200 hours:
A
A-12 Engine maintenance -
Kubota models
A+B
A-13 Drain filter/separator -
Kubota diesel models
A+B+C
Perform every 1-2 months:
A-14 Engine maintenance -
A+B+C+D
Kubota diesel models
Comments
GS-2669 RT • GS-3369 RT • GS-4069 RT
Section 3 • Scheduled Maintenance Procedures
Y N R Checklist B
B-1 Battery
B-2 Electrical wiring
B-3 Tires and wheels
B-4 Engine maintenance -
Perkins models
B-5 Key switch
B-6 Emergency Stop
B-7 Horn
B-8 Fuel select -
Gasoline/LPG models
B-9 Drive brakes
B-10 Drive speed - stowed
B-11 Drive speed - raised
B-12 Fuel tank check valve -
Gas / LPG Models
B-13 Tank venting systems
B-14 Hydraulic oil analysis
B-15 Flashing beacons
(if equipped)
B-16 Drive hub oil
Perform every 400 hours:
B-17 Engine maintenance -
Kubota diesel models
Y N R
3 - 5