Maintenance Inspection Report - Genie Lift Service Manual

Service Manual

Maintenance Inspection Report

Maintenanc e Ins pection R eport
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
• Make copies of this report to use for
each inspection.
• Select the appropriate checklist(s) for
the type of inspection(s) to perform.
Daily or every 8 hours
Quarterly or every
250 hours
Annually or every
1000 hours
• Place a check in the appropriate box
after each inspection procedure is
completed.
• Use the step-by-step procedures in
this section to learn how to perform
these inspections.
• If any inspection receives an "N," tag
and remove the machine from service,
repair and re-inspect it. After repair,
place a check in the "R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
18
Checklist A
A-1 Inspect the manuals
and decals
A-2 Pre-operation
inspection
A-3 Function tests
A-4 Inspect the
channels
A-5 Inspect cable and
pulleys
A-6 Inspect casters and
wheels
Comments
A
A + B
A + B + C
Y N R
Genie Lift
September 2016
Checklist B
B-1 Battery
B-2 Electrical wiring
B-3 Electric winch
maintenance
B-4 Carriage hold-down
B-5 Inspect welds
B-6 Clean channels
B-7 Inspect and lubricate
manual winch
Checklist C
C-1 Caster and wheels
C-2 Winch friction disks
C-3 Inspect painted
surfaces
Part No. 115417
Y N R
Y N R