Introduction - Genie GS-2669 RT Service Manual

Introduction

Important
Read, understand and obey the safety rules and
operating instructions in the appropriate Operator's
Manual on your machine before attempting any
maintenance or repair procedure.
This manual provides detailed scheduled
maintenance information for the machine owner and
user. It also provides troubleshooting fault codes
and repair procedures for qualified service
professionals.
Basic mechanical, hydraulic and electrical skills are
required to perform most procedures. However,
several procedures require specialized skills, tools,
lifting equipment and a suitable workshop. In these
instances, we strongly recommend that
maintenance and repair be performed at an
authorized Genie dealer service center.
Compliance
Machine Classification
Group B/Type 3 as defined by ISO 16368
Machine Design Life
Unrestricted with proper operation, inspection and
scheduled maintenance.
Technical Publications
Genie has endeavored to deliver the highest degree
of accuracy possible. However, continuous
improvement of our products is a Genie policy.
Therefore, product specifications
are subject to change without notice.
Readers are encouraged to notify Genie of errors
and send in suggestions for improvement. All
communications will be carefully considered for
future printings of this and all other manuals.
Contact Us:
www.genielift.com
e-mail: awp.techpub@terex.com
ii GS-2669 RT • GS-3369 RT • GS-4069 RT
Copyright © 2011 Terex Corporation
229753 Rev D January 2014
First Edition, Fourth Printing
Genie is a registered trademark of Terex South
Dakota, Inc. in the USA and many other
countries. "GS" is a trademark of Terex South
Dakota, Inc.
Printed on recycled paper
Printed in U.S.A.
November 2014
Part No. 229753