Genie GS-2669 RT Service Manual page 92

Section 4 • Repair Procedures
SCISSOR COMPONENTS
GS-4069 RT:
Bodily injury hazard. This
procedure requires specific repair
skills, lifting equipment and a
suitable workshop. Attempting this
procedure without these skills and
tools could result in death or
serious injury and significant
component damage. Dealer
service is strongly recommended.
Note: When removing a hose assembly or fitting,
the O-ring on the fitting and/or hose must be
replaced and then torqued to specification during
installation. Refer to Section 2, Hydraulic Hose and
Fitting Torque Specifications .
1 Remove the platform. See 2-1, How to Remove
the Platform.
2 Disassemble the scissor assembly.
See 3-3, How to Disassemble the Scissor
Assembly.
4 - 22 GS-2669 RT • GS-3369 RT • GS-4069 RT
Upper
Cylinder
Lower
Cylinder
Note: 'alphanumeric' call outs
refer to corresponding notes
on the electrical schematic
GS-4069 RT
a platform down solenoid valve
b upper lift cylinder
c lower lift cylinder
d pressure switch (CE models)
November 2014
Note: 'alpha' call outs refer to
corresponding notes on the
hydraulic schematic
Y7A
Y10A
A I
a
b
Y7
Y10
A I
a c d
Part No. 229753
AK