Unit Control Menu - Alvarion BreezeNET B System Manual

Chapter 4 - Operation
Allowed Bandwidth: If more than one bandwidth is allowed, each bandwidth

is associated with a different sub-band, as the bandwidth may affect the
available frequencies. Currently, all Country Codes support bandwidths of 10
and 20 MHz. Where allowed, a bandwidth of 40 MHz (Turbo Mode) is also
supported.
Regulation Max Tx Power at Antenna Port: The maximum transmit power

allowed at the antenna port of the unit.
Regulation Max EIRP: The maximum allowed EIRP (Effective Isotropic

Radiated Power) in dBm, or No Limit.
Min Modulation Level: The lowest allowed modulation level.

Max Modulation Level: The highest allowed modulation level.

Burst Mode: Indicates whether Burst Mode operation is allowed.

Maximum Burst Duration: If Burst Mode is supported, this parameter

displays the upper limit for the Maximum Burst Duration parameters.
DFS Option: Indicates whether the DFS (Dynamic Frequency Selection)

mechanism for identification and avoidance of channels with radar activity is
supported.
Minimum HW Revision Support: The minimum HW revision required to

support the Sub Band.
New Country Code files can be uploaded remotely using TFTP (see
4.2.2.5 Show All Parameters
The Show All Parameters menu is a read only menu that displays the current
values of all status and configuration parameters.
NOTE
The values of some security related parameters, including the encryption Keys, ESSID and
Operator ESSID, are available only with Administrator access rights.
4.2.3

Unit Control Menu

The Unit Control menu enables configuring control parameters for the unit.
BreezeNET B 59
Menus and Parameters
Appendix B).
System Manual